The best location to install AIRLOCK One is close to the AC intake, where air is pulled into the system. This ensures ions are carried through the ductwork and circulated throughout the cabin. If mounting near the intake isn't possible, you can also
Yes—AIRLOCK One can be mounted upright, upside down, or sideways. The orientation doesn’t affect performance as long as it’s installed securely and the ion emitters are exposed to airflow and not touching any surfaces.
Yes—AIRLOCK One can be installed on a diesel heater duct as long as the airflow is steady and the temperature in the duct stays below 130°F (54°C). Make sure the ion emitters are positioned in the airflow and not touching any surfaces.
Yes—AIRLOCK One can be installed on a diesel heater duct as long as the airflow is steady and the temperature in the duct stays below 130°F (54°C). Make sure the ion emitters are positioned in the airflow and not touching any surfaces.
Yes—AIRLOCK One can be mounted externally on a portable AC unit if three conditions are met:. There is direct airflow across the ion emitters. The device is securely mounted using screws or the magnetic plate. The ion emitters are not touching any su
Installing AIRLOCK One on split system air conditioners can vary depending on the specific setup and location of the units. In many situations, a plug-in installation is feasible, where the unit draws power from the nearest available power source.